GLEASON-PHOENIX - Gear Hobbing Machine - Vertical Stock-No. 03232
Offer details
Stock-No.
03232 Type of machine
Gear Hobbing Machine - Vertical Make
GLEASON-PHOENIX Type
125 GH Year of manufacture
1996 Type of control
CNC Control name
Fanuc 150-M
additional information
- Technical data / working range:
- Max. torque of the hob spindle 280 Nm
- Max. milling cutter helix angle +/- 45 deg.
- Milling head total swivel angle -180/+40 = 220 deg.
- Minimum number of teeth 4
- Axis distance between milling spindle and workpiece table:
- Minimum 15 mm
- Maximum 180 mm
- Height - workpiece table to milling spindle axis:
- Minimum 25 mm
- Maximum 325 mm
- Max. axial travel 300 mm
- Max. radial travel 165 mm
- Distance between the workpiece table and the lower edge of the counterholder:
- Minimum 252 mm
- Maximum 473 mm
- Workpiece - dimensions:
- Diameter 112mm
- Gleason #15 work spindle taper
- Guide diameter 66.4 mm
- Depth of work table bore 85.5 mm (drawbar in up position)
- Bolt circle diameter on the workpiece table 90 mm
- Fastening thread on the workpiece table M8 x 1.25 x 15 mm
- (4 holes equally spaced)
- Clamping force of the hydraulic workpiece clamping device:
- down 3900 kg / 41.4 bar
- upwards of 1115 kg / 41.4 bar
- Max. hob diameter 115 mm
- Max. hob length 215 mm
- ISO #30 hob spindle taper
- Tangential travel (shift travel) 200 mm
- Cutter speed range, standard 150 - 1500 rpm.
- Workpiece table speed range, standard 5 - 150 rpm.
- Max. rapid traverse speed 100 mm/s
- axial - radial - tangential (6000 mm/min.)
- Workpiece table height from floor 1016 mm
-
- Equipment/Accessoires:
- -Workpiece handling robot, make KUKA KR 16-2 S, built 2010
- -control KR C2
- -capacity 16 kg, working range 1611 mm
- -centrifuge, to spin off the oil from the workpiece
- -marking device
- -chip conveyor
- -oil-mist extractor
- -various pallets for handling robot
- -various hob arbors and holders
- -safety fence
-
Print (PDF)
REQUEST
AVAILABLE MACHINES FROM THE SAME CATEGORY
